Vibration Sensor (Accelerometer)
MEMS vibration sensor with magnetic mount and 5 m or 10 m cable. Compatible with all Balanset models.
Vibration Sensor — MEMS Accelerometer for Balanset
Replacement or spare vibration sensor for Balanset-1A, Balanset-4, and Balanset-AR. Each Balanset unit uses two vibration sensors (one per measurement channel). This listing is for a single sensor.
Specifications
- Type: MEMS accelerometer
- Frequency range: 5–1000 Hz
- Vibration velocity range: 0.02–80 mm/s RMS
- Cable length: 5 m (shielded)
- Connector: GX16 (plugs into the X1 or X2 sensor input on the Balanset unit)
- Mounting: Magnetic base (built-in) or M4 threaded stud
Installation
Mount the sensor on a solid, non-rotating part of the machine housing — ideally on or near the bearing support. Use the built-in magnetic base for quick attachment to ferrous surfaces, or the M4 threaded stud for permanent or non-magnetic installations. The sensor axis should be perpendicular to the shaft (radial measurement).
Related Products
Reflective Tape
Self-adhesive reflective tape for use with Balanset laser tachometer. Supplied as 1 m of pre-cut strips in a bag — enough for dozens of balancing jobs.
Optical Sensor (Laser Tachometer)
Laser optical sensor for RPM measurement and phase reference. Compatible with Balanset-1A, Balanset-4, and Balanset-AR.
Magnetic Stand
Articulated magnetic stand for mounting the Balanset laser tachometer. Strong magnetic base, flexible arm, universal clamp.